Question 1

What does error code E3 (Gorenje Washing Machine) u Gorenje & Mora mean and how to fix it?

Accepted Answer

Appliance not filling with water – operating water level in drum not reached. Troubleshooting & fix: Clean the inlet hose strainer mesh, check water pressure, and ensure the drain hose is not routed too low (below 60 cm causes self-siphoning straight into the drain!).

Question 2

What does error code E4 (Dishwasher) / F10 (Washing Machine) u Gorenje & Mora mean and how to fix it?

Accepted Answer

Water overflow or activation of the bottom AquaStop float switch. Troubleshooting & fix: Drain any water from the bottom safety tray, blow through the water level pressure switch (pressostat) tube, and check for excessive detergent foaming.

Question 3

What does error code E7 / F7 (Gorenje Washing Machine) u Gorenje & Mora mean and how to fix it?

Accepted Answer

Washing machine not draining water – blocked drain pump. Troubleshooting & fix: Clean the lint trap (pump filter) at the bottom front corner of the washing machine and verify that the sink trap drain spigot is not clogged.

Question 4

What does error code F11 (Gorenje / Mora Dishwasher) u Gorenje & Mora mean and how to fix it?

Accepted Answer

Dishwasher not draining water or grease-fouled sump water level sensor. Troubleshooting & fix: Remove the bottom dishwasher filters, scrub the sump chamber with hot water and degreaser (grease fouls the optical/pressure water sensor), and inspect the drain pump.

Question 5

What does error code Er22 / F5 / E0 (Induction Hob) u Gorenje & Mora mean and how to fix it?

Accepted Answer

Touch control panel fault (Er22) or induction power module overheating (F5). Troubleshooting & fix: For code Er22, wipe the glass dry over the touch sensors and turn off the hob circuit breaker for 5 minutes; for code F5, check the ventilation gap underneath the hob and verify bottom fan operation.

Gorenje & Mora Error Codes: E3, E4 / F10, E7 / F7, F11, Er22 / F5 – Error Code Meaning, Troubleshooting & Repair

Error Code Reference Table for Gorenje & Mora and step-by-step repair procedure:

Error Code	Meaning / Fault Symptom	Most Common Cause & Repair Procedure
E3 (Gorenje Washing Machine)	Appliance not filling with water – operating water level in drum not reached	Clean the inlet hose strainer mesh, check water pressure, and ensure the drain hose is not routed too low (below 60 cm causes self-siphoning straight into the drain!).
E4 (Dishwasher) / F10 (Washing Machine)	Water overflow or activation of the bottom AquaStop float switch	Drain any water from the bottom safety tray, blow through the water level pressure switch (pressostat) tube, and check for excessive detergent foaming.
E7 / F7 (Gorenje Washing Machine)	Washing machine not draining water – blocked drain pump	Clean the lint trap (pump filter) at the bottom front corner of the washing machine and verify that the sink trap drain spigot is not clogged.
F11 (Gorenje / Mora Dishwasher)	Dishwasher not draining water or grease-fouled sump water level sensor	Remove the bottom dishwasher filters, scrub the sump chamber with hot water and degreaser (grease fouls the optical/pressure water sensor), and inspect the drain pump.
Er22 / F5 / E0 (Induction Hob)	Touch control panel fault (Er22) or induction power module overheating (F5)	For code Er22, wipe the glass dry over the touch sensors and turn off the hob circuit breaker for 5 minutes; for code F5, check the ventilation gap underneath the hob and verify bottom fan operation.